1、 Install the anti-theft system
Safety is the most important issue for car owners, so new cars are generally equipped with anti-theft devices. Common anti-theft devices on the market include anti-theft device, central control lock, gear shift lock, steering wheel lock, etc.
The anti-theft device can lock the engine in the anti-theft state. Even the original car key can't start the car. At the same time, it can connect the central lock of the four doors. It is very convenient to open and close the doors. It has both the whistle warning function and can be adjusted to the silent anti-theft state to prevent disturbing people, so it is loved by car owners. The price of remote visible two-way car anti-theft device is about 1100 yuan, and that of intelligent car anti-theft system is about 800 yuan. If it is an ordinary central lock, the price is generally between 160 yuan and 400 yuan.
Vehicles equipped with electronic anti-theft devices can generally remotely control the door, which is very convenient and practical. However, once the thief has mastered the cracking method, it is easy to steal the car. Many cars are equipped with gearshift locks. The gear shift lock is a mechanical lock. Put the gear lever of the car on the neutral or reverse position lock. Even if the thief starts the car, he cannot drive it away. The space in the car is small, and the lock rod is hard and not easy to be sawed off. The selection of anti-theft device and shift lock should be considered from three aspects: product quality, installation technology and after-sales service. During installation, attention should be paid to not changing the circuit as much as possible.
2、 Floor covering glue and foot pad
Generally, there are felt like objects under the car seats, which are completely paved on the original car. Once dirt and dirt are left on the seats, it is difficult to clean them. So after buying a new car, most people will lay a layer of waterproof and easy to scrub protective material -- floor glue under the seat. The floor glue is divided into two types: hand sewn floor glue and molded floor glue. The floor glue with good board type and manual work can effectively prevent dust and dirt from seeping into the carpet, but its waterproof ability is poor. The molded floor glue is pressed at one time. It is seamless in the middle and has good leak resistance. However, when it comes to the large concave and convex interior floor, the aesthetics of the pavement is poor. Generally, the glue is made of 3mm thick rubber products in gray, beige and black colors. In addition, the paving level of the floor glue is also very important. If it is not well paved, it is easy to warp around and uneven in the middle. The overall feeling is very uncomfortable.
Because the floor glue is a rubber product, some smell and color are few, and some high-end cars are low grade after being paved, so it is good to pave carpets, but it is difficult to clean up. In order to solve this contradiction, some people do not lay glue on the floor of the whole car, but just put a variety of color and texture mats under the front and rear seats. This is a good way to look beautiful and protect the environment.
3、 Paste explosion-proof membrane
There are many kinds of explosion-proof membranes on the market, and their prices vary from two, three hundred to thousands. When selecting membranes, we should try to choose imported explosion-proof membranes with quality guarantee cards. In addition to the quality of the explosion-proof membrane itself, the film pasting process is also very important.
First of all, the film must be applied indoors, and the stains and impurities on the glass must be thoroughly removed with water spray, shovel and other tools before application. Secondly, the film shall be formed at one time, and shall not be removed or pasted repeatedly. If sand spots or dead wrinkles appear after the film is pasted, it must be removed and replaced with a new film. It should be noted that the front and rear windshield glasses should be pasted in whole. In particular, the front windshield film must be a special film for the front windshield, otherwise dizziness and dizziness will be caused and driving safety will be affected.
4、 Replace seat cover
Chinese people pay attention to face when buying cars. In addition to the big car body, the light interior and leather seats are also reference indicators. So many people always want to change into leather seats after they buy an economy car, but they don't know that leather seats are expensive and difficult to clean. In fact, they are not suitable for family cars. So I suggest you save the money for leather seats. According to the season and season, you can buy several seat covers of different styles and textures for your car. First, you can always replace them with new ones, and second, you can also take care of them easily.
Just after summer, the bamboo chair covers of some people haven't been closed yet, and the raging cold wind has brought Beijing into winter all of a sudden. While busy adding clothes to yourself and your family, don't forget to change your car into winter clothes. There are all kinds of choices in the market. Those who like to clean cleanly can add a sheepskin cushion on the cotton and linen seat cover. The price is more than one hundred to three hundred. If it is in the wholesale market, the price will be lower. If you want your car to look elegant, try the new fur integrated seat cover. It is fluffy and warm. With such a seat cover and a steering wheel cover of the same texture, your car will not be cold this winter. However, it should be noted that the seat cover with fur is easy to get dirty, which is not easy to maintain, and the price is expensive. Generally, a seat cover costs more than 600 yuan. Therefore, you should recognize the origin of Inner Mongolia and Hebei when purchasing, and the color and style should also match the model.
